Structural, optical, and acoustic characterization of high-quality AlN thick films sputtered on Al2O3(0001) at low temperature for GHz-band electroacoustic devices applications

被引:45
作者
Caliendo, C
Imperatori, P
机构
[1] CNR, Ist Sistemi Complessi, I-00133 Rome, Italy
[2] CNR, Ist Struttura Mat, I-00016 Monterotondo, Roma, Italy
关键词
D O I
10.1063/1.1777809
中图分类号
O59 [应用物理学];
学科分类号
摘要
Aluminum nitride thin and thick films were grown on Al2O3(0001) substrates by reactive radio frequency-sputtering technique at 180 degreesC. The AlN films, 0.022-6.2 mum thick, were stress-free, uniform, transparent, and extremely adhesive to the substrate. Their structural properties were investigated by x-ray diffraction measurements: the resulting films were highly c-axis oriented, with a full width at half maximum of the (0002) rocking curve in the range from 1.6degrees to 1.0degrees for AlN film thickness ranging between 0.022 and 6.2 mum. The crystalline quality of AlN films was extremely good even at high thicknesses, as shown by the presence of the AlN(0004) reflection and by the narrow (0.12degrees-0.20degrees) diffraction peaks. Optical measurements of the transmission in the visual and infrared region demonstrated that the AlN films have low absorption and scattering. The extinction and the absorption coefficients, alpha and K-e, were estimated at lambdagreater than or equal to600 nm (alpha=850+/-50 cm(-1),K-e=0.0040+/-0.0005). The piezoelectric strain constant d(33) was measured for all the sputtered films: the mean d(33) value was (4.2+/-0.7)x10(-12) C/N, which is very close to the value of the AlN single crystal. Surface acoustic wave (SAW) delay lines were photolithographically defined on the free surface of the AlN films grown on bare or metallized Al2O3(0001) substrates. Harmonic modes operating at frequencies up to about 2.4 GHz were obtained just by using a conventional photolithographic technique with 7.5 mum linewidth. The phase and group velocities of SAWs propagating in AlN/Al/Al2O3 and in AlN/Al2O3 structures, along and normal to the Al2O3 a axis, were estimated for different AlN thicknesses. The experimental measurements were compared with the theoretical data and found to be in good agreement. (C) 2004 American Institute of Physics.
引用
收藏
页码:2610 / 2615
页数:6
相关论文
共 21 条
[1]  
Adler E.L., 1982, P IEEE ULTR S SAN DI, P103
[2]   Gigahertz-band electroacoustic devices based on AlN thick films sputtered on Al2O3 at low temperature [J].
Caliendo, C .
APPLIED PHYSICS LETTERS, 2003, 83 (23) :4851-4853
[3]   Structural morphological and acoustic properties of AlN thick films sputtered on Si(001) and Si(111) substrates at low temperature [J].
Caliendo, C ;
Imperatori, P ;
Cianci, E .
THIN SOLID FILMS, 2003, 441 (1-2) :32-37
[4]   An integrated optical method for measuring the thickness and refractive index of birefringent thin films [J].
Caliendo, C ;
Verona, E ;
Saggio, G .
THIN SOLID FILMS, 1997, 292 (1-2) :255-259
[5]  
CRACIUN F, 2002, HDB THIN FILM MAT, V3, P231
[6]  
GUALTIERI JG, 1992, P IEEE ULTR S TUCS A, P403
[7]   On the initial stages of AlN thin-film growth onto, 0001 oriented Al2O3 substrates by molecular beam epitaxy [J].
Heffelfinger, JR ;
Medlin, DL ;
McCarty, KF .
JOURNAL OF APPLIED PHYSICS, 1999, 85 (01) :466-472
[8]   Oriented AlN films prepared with solid AlCl3 source by bias assisted Cat-CVD [J].
Huang, AP ;
Wang, GJ ;
Xu, SL ;
Zhu, MK ;
Li, GH ;
Wang, B ;
Yan, H .
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 2004, 107 (02) :161-165
[9]   Synthesis of C-axis oriented AlN thin films on metal layers:: Al, Mo, Ti, TiN and Ni. [J].
Iriarte, GF ;
Bjurström, J ;
Westlinder, J ;
Engelmark, F ;
Katardjiev, IV .
2002 IEEE ULTRASONICS SYMPOSIUM PROCEEDINGS, VOLS 1 AND 2, 2002, :311-315
[10]   Reactive sputter deposition of highly oriented AIN films at room temperature [J].
Iriarte, GF ;
Engelmark, F ;
Katardjiev, L .
JOURNAL OF MATERIALS RESEARCH, 2002, 17 (06) :1469-1475