Non-contact measurements of thermophysical properties of titanium at high temperature

被引:70
作者
Paradis, PF [1 ]
Rhim, WK [1 ]
机构
[1] CALTECH, Jet Prop Lab, Pasadena, CA 91109 USA
基金
美国国家航空航天局;
关键词
titanium; thermophysical properties; high temperature; electrostatic levitation;
D O I
10.1006/jcht.1999.0576
中图分类号
O414.1 [热力学];
学科分类号
摘要
Four thermophysical properties of both solid and liquid titanium measured using the high-temperature electrostatic levitator at JPL are presented. These properties are density, thermal expansion coefficient, constant pressure heat capacity, and hemispherical total emissivity. For the first time, we report the density, the thermal expansion coefficient, and the ratio of the constant pressure heat capacity to the hemispherical total emissivity of undercooled titanium over a wide range of temperatures. Over the 1650 K to 2000 K temperature span, the liquid density can be expressed as rho(T)/(kg.m(-3)) = 4.208 . 10(3) - 0.508 (T - T-m)/K with T-m = 1943 K, and the corresponding volume expansion coefficient as alpha = 1.169 . 10(-4) K-1. Similarly, over the 1540 K to 1940 K temperature range, the measured density of the solid can be expressed as rho(T)/(kg.m(-3)) = 4.321 . 10(3) - 0.212 (T - T-m)/K, giving a volume expansion coefficient alpha = 4.76 10(-5) K-1. The constant pressure heat capacity of the liquid phase could be estimated as C-p,C-m(T)/(J . K-1 . mol(-1)) = 45.5 - 3.21 . 10(-3). (T - T-m)/K if the hemispherical total emissivity of the liquid phase epsilon(T) remains constant at 0.34 over the 1650 K to 2000 K temperature range. Over the 1540 K to 1940 K temperature span, the hemispherical total emissivity of the solid phase could be rendered as epsilon(T)(T) = 0.297 + 5.952 10(-5). (T - T-m)/K. The enthalpy of fusion has also been calculated as 14.3 kJ mol(-1) (C) 2000 Academic Press.
引用
收藏
页码:123 / 133
页数:11
相关论文
共 22 条
[11]   SURFACE TENSION OF TITANIUM, ZIRCONIUM, AND HAFNIUM [J].
PETERSON, AW ;
KEDESDY, H ;
KECK, PH ;
SCHWARZ, E .
JOURNAL OF APPLIED PHYSICS, 1958, 29 (02) :213-216
[12]   Noncontact electrical resistivity measurement technique for molten metals [J].
Rhim, WK ;
Ishikawa, T .
REVIEW OF SCIENTIFIC INSTRUMENTS, 1998, 69 (10) :3628-3633
[13]   AN ELECTROSTATIC LEVITATOR FOR HIGH-TEMPERATURE CONTAINERLESS MATERIALS PROCESSING IN 1-G [J].
RHIM, WK ;
CHUNG, SK ;
BARBER, D ;
MAN, KF ;
GUTT, G ;
RULISON, A ;
SPJUT, RE .
REVIEW OF SCIENTIFIC INSTRUMENTS, 1993, 64 (10) :2961-2970
[14]   Noncontact technique for measuring surface tension and viscosity of molten materials using high temperature electrostatic levitation [J].
Rhim, WK ;
Ohsaka, K ;
Paradis, PF ;
Spjut, RE .
REVIEW OF SCIENTIFIC INSTRUMENTS, 1999, 70 (06) :2796-2801
[15]   A NONCONTACT MEASUREMENT TECHNIQUE FOR THE SPECIFIC-HEAT AND TOTAL HEMISPHERICAL EMISSIVITY OF UNDERCOOLED REFRACTORY MATERIALS [J].
RULISON, AJ ;
RHIM, WK .
REVIEW OF SCIENTIFIC INSTRUMENTS, 1994, 65 (03) :695-700
[16]   CONSTANT-PRESSURE SPECIFIC-HEAT TO HEMISPHERICAL TOTAL EMISSIVITY RATIO FOR UNDERCOOLED LIQUID NICKEL, ZIRCONIUM, AND SILICON [J].
RULISON, AJ ;
RHIM, WK .
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 1995, 26 (03) :503-508
[17]  
SAITO T, 1969, T IRON STEEL I JPN, V9, P118
[18]  
SEYDEL U, 1979, PHYS F, V9, pL153
[19]   THERMODYNAMIC PROPERTIES BY LEVITATION CALORIMETRY .3. ENTHALPIES OF FUSION AND HEAT CAPACITIES FOR LIQUID PHASES OF IRON, TATANIUM, AND VANADIUM [J].
TREVERTON, JA ;
MARGRAVE, JL .
JOURNAL OF CHEMICAL THERMODYNAMICS, 1971, 3 (04) :473-+
[20]  
WALKER JL, 1959, PHYSICAL CHEM PROC 2