Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies

被引：755

作者：

Liu, Ming ^{[1
]}

Tay, N. H. Steven ^{[1
]}

Bell, Stuart ^{[2
]}

Belusko, Martin ^{[1
]}

Jacob, Rhys ^{[1
]}

Will, Geoffrey ^{[2
]}

Saman, Wasim ^{[1
]}

Bruno, Frank ^{[1
]}

机构：

[1] Univ S Australia, Sch Engn, Barbara Hardy Inst, Mawson Lakes, SA 5095, Australia

[2] Queensland Univ Technol, Mech Engn Sci & Engn Fac, Energy & Proc Engn, Chem,Phys, Brisbane, Qld 4001, Australia

来源：

RENEWABLE & SUSTAINABLE ENERGY REVIEWS | 2016年 / 53卷

关键词：

Concentrating solar power (CSP); Thermal energy storage; Sensible heat storage; Latent heat storage; Phase change material; PHASE-CHANGE-MATERIAL; LATENT-HEAT STORAGE; MOLTEN NITRATE SALTS; OF-THE-ART; CORROSION BEHAVIOR; STAINLESS-STEEL; FUSED NA2SO4; TRANSFER FLUIDS; NUMERICAL-ANALYSIS; EXERGY ANALYSIS;

D O I：

10.1016/j.rser.2015.09.026

中图分类号：

X [环境科学、安全科学];

学科分类号：

083001 [环境科学];

摘要：

A concentrating solar power (CSP) system converts sunlight into a heat source which can be used to drive a conventional power plant. Thermal energy storage (TES) improves the dispatchability of a CSP plant. Heat can be stored in either sensible, latent or thermochemical storage. Commercial deployment of CSP systems have been achieved in recent years with the two-tank sensible storage system using molten salt as the storage medium. Considerable research effort has been conducted to improve the efficiency of the CSP system and make the cost of electricity comparable to that of the conventional fossil-fuel power plant. This paper provides a comprehensive summary of CSP plants both in operation and under construction. It covers the available technologies for the receiver, thermal storage, power block and heat transfer fluid. This paper also reviews developments in high temperature TES over the past decade with a focus on sensible and latent heat storage. High temperature corrosion and economic aspects of these systems are also discussed. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：1411 / 1432

页数：22

共 211 条

[31]

Transport properties in a family of dialkylimidazolium ionic liquids [J].

Every, HA ;

Bishop, AG ;

MacFarlane, DR ;

Orädd, G ;

Forsyth, M .

PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 2004, 6 (08) :1758-1765

[32]

Faghri Amir., 1995, HEAT PIPE SCI TECHNO

[33]

Thermal storage material from inertized wastes: Evolution of structural and radiative properties with temperature [J].

Faik, A. ;

Guillot, S. ;

Lambert, J. ;

Veron, E. ;

Ory, S. ;

Bessada, C. ;

Echegut, P. ;

Py, X. .

SOLAR ENERGY, 2012, 86 (01) :139-146

[34]

Fernandes A., 2014, ONCOTARGET IN PRESS, P1

[35]

Thermal energy storage: "How previous findings determine current research priorities" [J].

Fernandes, D. ;

Pitie, F. ;

Caceres, G. ;

Baeyens, J. .

ENERGY, 2012, 39 (01) :246-257

[36]

Corrosion of stainless steels and low-Cr steel in molten Ca(NO3)2-NaNO3-KNO3 eutectic salt for direct energy storage in CSP plants [J].

Fernandez, A. G. ;

Galleguillos, H. ;

Fuentealba, E. ;

Perez, F. J. .

SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2015, 141 :7-13

[37]

Thermal characterisation of an innovative quaternary molten nitrate mixture for energy storage in CSP plants [J].

Fernandez, A. G. ;

Ushak, S. ;

Galleguillos, H. ;

Perez, F. J. .

SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2015, 132 :172-177

[38]

Corrosion of alumina-forming austenitic steel in molten nitrate salts by gravimetric analysis and impedance spectroscopy [J].

Fernandez, A. G. ;

Rey, A. ;

Lasanta, I. ;

Mato, S. ;

Brady, M. P. ;

Perez, F. J. .

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2014, 65 (03) :267-275

[39]

Development of new molten salts with LiNO3 and Ca(NO3)2 for energy storage in CSP plants [J].

Fernandez, A. G. ;

Ushak, S. ;

Galleguillos, H. ;

Perez, F. J. .

APPLIED ENERGY, 2014, 119 :131-140

[40]

Flueckiger S.M., 2013, DESIGN MOLTEN SALT T

← 1 2 3 4 5 6 7 8 9 10 →