FRACTURE OF METAL-POLYMER LINE STRUCTURES .1. SEMIFLEXIBLE POLYIMIDE

被引:67
作者
CHIU, SL [1 ]
LEU, J [1 ]
HO, PS [1 ]
机构
[1] UNIV TEXAS,CTR MAT SCI & ENGN,AUSTIN,TX 78712
关键词
D O I
10.1063/1.357227
中图分类号
O59 [应用物理学];
学科分类号
摘要
The fracture characteristics of metal/polymer line structures formed by depositing Au/Cr lines on a semiflexible polyimide, pyromellitic dianhydride-oxydianiline (PMDA-ODA), substrate have been investigated using a stretch deformation technique. The delamination behavior, fracture morphology, fracture energy, and energy dissipation rate have been determined as a function of line width and thickness. The metal dimension was found to influence the crack formation mode and morphology. The experimental studies were supplemented by finite-element analysis to evaluate the stress distribution and deformation energetics of the line structure, which takes into account the plastic deformation of the metal and the polymer. Results from this analysis show that the observed fracture characteristics can be attributed to the edge and thickness effects induced by metal confinement. Essentially, the deformation behavior is determined by the mechanical environment induced by metal confinement at the interface. Plastic deformation of both metal and polymer plays an important role in controlling the stress distributions as well as the deformation energetics. The fracture energy of the metal-polyimide interface determined by an overall energy balance method was consistent with that obtained from energy dissipation rate. The average value is 25 J/m(2) for the Au/Cr/PMDA-ODA Line structure.
引用
收藏
页码:5136 / 5142
页数:7
相关论文
共 9 条
  • [1] ELECTRODEPOSITION OF LOW STRESS GOLD FOR X-RAY MASK
    CHIU, SL
    ACOSTA, RE
    [J]. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 1990, 8 (06): : 1589 - 1594
  • [2] CHOW TS, 1975, ADHESION SCI TECHNOL, V9, P687
  • [3] ADHESION AND DEFORMATION OF METAL POLYIMIDE LAYERED STRUCTURES
    FAUPEL, F
    YANG, CH
    CHEN, ST
    HO, PS
    [J]. JOURNAL OF APPLIED PHYSICS, 1989, 65 (05) : 1911 - 1917
  • [4] ADHESION AND DEFORMATION STUDY OF METAL POLYMER STRUCTURES BY A STRETCH DEFORMATION METHOD
    HO, PS
    FAUPEL, F
    [J]. APPLIED PHYSICS LETTERS, 1988, 53 (17) : 1602 - 1604
  • [5] COPPER POLYIMIDE MATERIALS SYSTEM FOR HIGH-PERFORMANCE PACKAGING
    JENSEN, RJ
    CUMMINGS, JP
    VORA, H
    [J]. IEEE TRANSACTIONS ON COMPONENTS HYBRIDS AND MANUFACTURING TECHNOLOGY, 1984, 7 (04): : 384 - 393
  • [6] ELASTO-PLASTIC ANALYSIS OF THE PEEL TEST FOR THIN-FILM ADHESION
    KIM, KS
    KIM, J
    [J]. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1988, 110 (03): : 266 - 273
  • [7] LEE YK, 1982, ACS SYM SER, V184, P107
  • [8] ADHESION AND FRACTURE-ANALYSIS OF METAL/POLYIMIDE FINE LINE STRUCTURES
    POON, TW
    LEU, JP
    KASTHURIRANGAN, J
    HO, PS
    [J]. JOURNAL OF APPLIED PHYSICS, 1994, 76 (09) : 5515 - 5523
  • [9] SERAPHIM DP, 1989, PRINCIPLES ELECTRONI