Structural properties of TiN films grown on stainless steel substrates by a reactive radio-frequency sputtering technique at low temperature

TiN thin films were grown on stainless steel substrates by using the reactive radio-frequency magnetron-sputtering technique at relatively low temperature (similar to 200 degrees C) using Ti and N-2. The deposition rate of the TiN film increased linearly with increasing applied radio-frequency power, and it decreased with increasing partial-pressure ratio of the N-2 gas to the Ar gas. Scanning electron microscopy (SEM) showed that the surfaces of the TiN films had very smooth morphologies. The TiN thin film had good stoichiometry for a partial-pressure ratio of 0.05. The stoichiometry of the TiN films and the interface qualities of the TiN/stainless steel heterostructures were investigated by Auger electron spectroscopy (AES) measurements. Auger depth profiles indicated that the compositions of the as-grown films consisted of titanium and nitrogen uniformly distributed throughout the films and that the films exhibited smooth interfaces. The interface quality of the TiN films to the stainless steel substrates were improved by annealing. These results indicate that annealed TiN thin films grown on stainless steel substrates hold promise for potential applications in advanced ceramic devices. (C) 1999 Published by Elsevier Science B.V. All tights reserved.