In Vivo Validation of Numerical Prediction for Turbulence Intensity in an Aortic Coarctation

被引:58
作者
Arzani, Amirhossein [1 ]
Dyverfeldt, Petter [2 ,3 ,5 ]
Ebbers, Tino [2 ,3 ,4 ]
Shadden, Shawn C. [1 ]
机构
[1] IIT, Dept Mech Mat & Aerosp Engn, Chicago, IL 60616 USA
[2] Linkoping Univ, Dept Management & Engn, Div Appl Thermodynam & Fluid Mech, Linkoping, Sweden
[3] Linkoping Univ, Ctr Med Image Sci & Visualizat CMIV, Linkoping, Sweden
[4] Linkoping Univ, Dept Med & Hlth Sci, Div Cardiovasc Med, Linkoping, Sweden
[5] Univ Calif San Francisco, Dept Radiol & Biomed Imaging, San Francisco, CA 94143 USA
基金
瑞典研究理事会;
关键词
Computational fluid dynamics; Phase-contrast magnetic resonance imaging; Turbulent kinetic energy; Blood flow; WALL SHEAR-STRESS; BLOOD-FLOW; ARTERIAL COMPLIANCE; MRI; CFD; SIMULATION; ANEURYSMS; QUANTIFICATION; VELOCITIES; PRESSURE;
D O I
10.1007/s10439-011-0447-6
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
This paper compares numerical predictions of turbulence intensity with in vivo measurement. Magnetic resonance imaging (MRI) was carried out on a 60-year-old female with a restenosed aortic coarctation. Time-resolved three-directional phase-contrast (PC) MRI data was acquired to enable turbulence intensity estimation. A contrast-enhanced MR angiography (MRA) and a time-resolved 2D PCMRI measurement were also performed to acquire data needed to perform subsequent image-based computational fluid dynamics (CFD) modeling. A 3D model of the aortic coarctation and surrounding vasculature was constructed from the MRA data, and physiologic boundary conditions were modeled to match 2D PCMRI and pressure pulse measurements. Blood flow velocity data was subsequently obtained by numerical simulation. Turbulent kinetic energy (TKE) was computed from the resulting CFD data. Results indicate relative agreement (error a parts per thousand 10%) between the in vivo measurements and the CFD predictions of TKE. The discrepancies in modeled vs. measured TKE values were within expectations due to modeling and measurement errors.
引用
收藏
页码:860 / 870
页数:11
相关论文
共 41 条
[31]   Combined analysis of spatial and velocity displacement artifacts in phase contrast measurements of complex flows [J].
Steinman, DA ;
Ethier, CR ;
Rutt, BK .
JOURNAL OF MAGNETIC RESONANCE IMAGING, 1997, 7 (02) :339-346
[32]   COMPUTER-SIMULATION OF ARTERIAL FLOW WITH APPLICATIONS TO ARTERIAL AND AORTIC STENOSES [J].
STERGIOPULOS, N ;
YOUNG, DF ;
ROGGE, TR .
JOURNAL OF BIOMECHANICS, 1992, 25 (12) :1477-1488
[33]   SIMPLE AND ACCURATE WAY FOR ESTIMATING TOTAL AND SEGMENTAL ARTERIAL COMPLIANCE - THE PULSE PRESSURE METHOD [J].
STERGIOPULOS, N ;
MEISTER, JJ ;
WESTERHOF, N .
ANNALS OF BIOMEDICAL ENGINEERING, 1994, 22 (04) :392-397
[34]   Patient-Specific Modeling of Cardiovascular Mechanics [J].
Taylor, C. A. ;
Figueroa, C. A. .
ANNUAL REVIEW OF BIOMEDICAL ENGINEERING, 2009, 11 :109-134
[35]  
Taylor C A, 1999, Comput Aided Surg, V4, P231, DOI 10.3109/10929089909148176
[36]  
Taylor C.A., 1998, LECT NOTES COMPUT SC, V26, P1
[37]   Finite element modeling of blood flow in arteries [J].
Taylor, CA ;
Hughes, TJR ;
Zarins, CK .
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 1998, 158 (1-2) :155-196
[38]   Image-Based Modeling of Blood Flow and Vessel Wall Dynamics: Applications, Methods and Future Directions [J].
Taylor, Charles A. ;
Steinman, David A. .
ANNALS OF BIOMEDICAL ENGINEERING, 2010, 38 (03) :1188-1203
[39]   Outflow boundary conditions for three-dimensional finite element modeling of blood flow and pressure in arteries [J].
Vignon-Clementel, Irene E. ;
Figueroa, C. Alberto ;
Jansen, Kenneth E. ;
Taylor, Charles A. .
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2006, 195 (29-32) :3776-3796
[40]   Temporally resolved 3D phase-contrast imaging [J].
Wigstrom, L ;
Sjoqvist, L ;
Wranne, B .
MAGNETIC RESONANCE IN MEDICINE, 1996, 36 (05) :800-803