Optical characterization of MoO3 thin films produced by continuous wave CO2 laser-assisted evaporation

MoO3 thin films were prepared, in this work, evaporating the material with a CO, laser set up in continuous wave mode. The films were deposited on glass substrates at different substrate temperatures and high vacuum. Additionally, other samples were prepared at different oxygen pressures in the chamber. The samples were characterized by X-ray photoelectron spectroscopy (XPS) and optical transmittance measurements in the visible range. The XPS analyses showed evidence of thin film formation with two composition mix: MoO3 and MoO2; this result appeared in all fabricated samples. The transmittance spectra were reproduced theoretically and from the simulation were calculated the index of refraction, the absorption coefficient of the material, the forbidden energy gap and sample thickness. Samples prepared at high substrate temperature presented, in the red region, an absorption band of about 2.5 x 10(4) cm(-1). This band kept its wavelength position when oxygen was injected in the chamber but its height decreased by one order of magnitude, indicating it is associated to oxygen vacancies in the sample. (c) 2004 Elsevier B.V. All rights reserved.