Enhancing the photovoltaic properties of terpolymers containing benzo[1,2-b:4,5-b′]-dithiophene, phenanthro[4,5-abc]phenazine and benzo[c][1,2,5]thiadiazole by changing the substituents

被引:44
作者
Fan, Qunping [1 ]
Liu, Yu [1 ]
Xiao, Manjun [1 ]
Su, Wenyan [1 ]
Gao, Huishan [1 ]
Chen, Jianhua [1 ]
Tan, Hua [1 ]
Wang, Yafei [1 ]
Yang, Renqiang [2 ]
Zhu, Weiguo [1 ]
机构
[1] Xiangtan Univ, Coll Chem, Minist Educ, Key Lab Environm Friendly Chem & Applicat, Xiangtan 411105, Peoples R China
[2] Chinese Acad Sci, Qingdao Inst Bioenergy & Bioproc Technol, Qingdao 266101, Peoples R China
基金
湖南省自然科学基金; 中国国家自然科学基金;
关键词
POLYMER SOLAR-CELLS; OPEN-CIRCUIT VOLTAGE; POWER CONVERSION EFFICIENCY; DONOR-ACCEPTOR POLYMERS; CONJUGATED POLYMERS; SIDE-CHAIN; PERFORMANCE; COPOLYMERS; DIKETOPYRROLOPYRROLE; BENZODITHIOPHENE;
D O I
10.1039/c5tc00785b
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this study, three novel donor-acceptor (D-A)-type random conjugated terpolymers of PBDTT-PPzBT-H, PBDTT-PPzBT-F and PBDTT-PPzBT-O were synthesized by copolymerizing electron-rich 5,8-dialkylthienyl substituted benzo[1,2-b: 4,5-b']dithiophene (BDTT) and two electron-deficient phenanthro[4,5-abc]phenazine (PPz) and benzo[c][1,2,5]thiadiazole (BT) units. By changing the substituents at the 5,6-positions of BT, the optoelectronic properties of the terpolymers could be rationally adjusted for application as donor materials in polymer solar cells (PSCs). As a result, these terpolymers exhibited different light absorption properties, HOMO energy levels and hole mobilities, which contributed to the optimization of short-circuit current (J(sc)), open-circuit voltage (V-oc) and fill factor (FF) properties, respectively. Interestingly, a maximum power conversion efficiency (PCE) of 6.3% was obtained with an V-oc of 0.75 V, a J(sc) of 13.0 mA cm(-2) and a FF of 64.8% in the PBDTT-PPzBT-O based PSCs using [6,6]-phenyl-C-71-butyric acid methyl ester (PC71BM) as an acceptor, while PBDTT-PPzBT-H and PBDTT-PPzBT-F based devices also demonstrated a PCE of more than 4.5%. To the best of our knowledge, these are the highest recorded maximum PCE, J(sc) and FF values obtained to date compared with previously reported phenazine copolymeric derivatives in BHJ-PSCs. This study illustrates the potential of these random conjugated terpolymers as promising donor materials in the application of PSCs.
引用
收藏
页码:6240 / 6248
页数:9
相关论文
共 46 条
[41]   Molecular Design toward Highly Efficient Photovoltaic Polymers Based on Two-Dimensional Conjugated Benzodithiophene [J].
Ye, Long ;
Zhang, Shaoqing ;
Huo, Lijun ;
Zhang, Maojie ;
Hou, Jianhui .
ACCOUNTS OF CHEMICAL RESEARCH, 2014, 47 (05) :1595-1603
[42]   Synthesis of Quinoxaline-Based Donor-Acceptor Narrow-Band-Gap Polymers and Their Cyclized Derivatives for Bulk-Heterojunction Polymer Solar Cell Applications [J].
Zhang, Jie ;
Cai, Wanzhu ;
Huang, Fei ;
Wang, Ergang ;
Zhong, Chengmei ;
Liu, Shengjian ;
Wang, Ming ;
Duan, Chunhui ;
Yang, Tingbin ;
Cao, Yong .
MACROMOLECULES, 2011, 44 (04) :894-901
[43]   Efficient Polymer Solar Cells Based on Benzothiadiazole and Alkylphenyl Substituted Benzodithiophene with a Power Conversion Efficiency over 8% [J].
Zhang, Maojie ;
Gu, Yu ;
Guo, Xia ;
Liu, Feng ;
Zhang, Shaoqing ;
Huo, Lijun ;
Russell, Thomas P. ;
Hou, Jianhui .
ADVANCED MATERIALS, 2013, 25 (35) :4944-4949
[44]   Improved photovoltaic properties of terpolymers containing diketopyrrolopyrrole and an isoindigo side chain [J].
Zhang, Min ;
Wu, Fen ;
Cao, Zhencai ;
Shen, Tianpei ;
Chen, Huajie ;
Lia, Xiangling ;
Tan, Songting .
POLYMER CHEMISTRY, 2014, 5 (13) :4054-4060
[45]   Indacenodithiophene and Quinoxaline-Based Conjugated Polymers for Highly Efficient Polymer Solar Cells [J].
Zhang, Yong ;
Zou, Jingyu ;
Yip, Hin-Lap ;
Chen, Kung-Shih ;
Zeigler, David F. ;
Sun, Ying ;
Jen, Alex K-Y. .
CHEMISTRY OF MATERIALS, 2011, 23 (09) :2289-2291
[46]   Thiophene-Fused Benzothiadiazole: A Strong Electron-Acceptor Unit to Build D-A Copolymer for Highly Efficient Polymer Solar Cells [J].
Zhou, Pengcheng ;
Zhang, Zhi-Guo ;
Li, Yongfang ;
Chen, Xingguo ;
Qin, Jingui .
CHEMISTRY OF MATERIALS, 2014, 26 (11) :3495-3501