Perforation resistance of five different high-strength steel plates subjected to small-arms projectiles

Thin plates of high-strength steel are frequently being used both in civil and military ballistic protection systems. The choice of alloy is then a function of application, ballistic performance, weight and price. In this Study the perforation resistance of five different high-strength steels has been determined and compared against each other. The considered alloys are Weldox 500E, Weldox 700E, Hardox 400, Domex Protect 500 and Armox 560T. The yield stress for Armox 560T is about three times the yield stress for Weldox 500E, while the opposite yields for the ductility. To certify the perforation resistance of file various targets, two different ballistic protection Classes according to the European norm EN1063 have been considered, These are BR6 (7.62 mm Ball ammunition) and BR7 (7.62 mm AP ammunition), where the impact velocity of the bullet is about 830 m/s in both. Perforation tests have been carried out using adjusted ammunition to determine the ballistic limit of the various steels. In the tests,a target thickness of 6 mm and 6 + 6 - 12 mm was used for protection class BR6 and BR7, respectively. A material test programme was conducted for all steels to calibrate a modified Johnson-Cook constitutive relation and the Cockcroft-Latham fracture criterion, while material data for the bullets mainly were taken from the literature. Finally, results from 2D non-linear FE Simulations with detailed models of the bullets are presented and the different findings are compared against each other. As will be shown, good agreement between the FE Simulations and experimental data for the AP bullets is in general obtained, while it was difficult to get reliable FE results using the Lagrangian formulation of LS-DYNA for the soft core Ball bullet. (c) 2008 Elsevier Ltd. All rights reserved.