Mid-infrared (λ≈7.4 μm) quantum cascade laser amplifier for high power single-mode emission and improved beam quality

被引：36

作者：

Troccoli, M ^{[1
]}

Gmachl, C ^{[1
]}

Capasso, F ^{[1
]}

Sivco, DL ^{[1
]}

Cho, AY ^{[1
]}

机构：

[1] Lucent Technol, Bell Labs, Murray Hill, NJ 07974 USA

来源：

APPLIED PHYSICS LETTERS | 2002年 / 80卷 / 22期

关键词：

D O I：

10.1063/1.1479453

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

A quantum cascade laser amplifier has been developed. It was used to obtain high power single-mode emission at lambdaapproximate to7.4 mum from a quantum cascade distributed feedback laser, together with enhanced beam quality. Laser and amplifier are directly coupled in a master oscillator power amplifier configuration. Peak optical powers of 0.5 W at 80 K have been obtained. Ninety percent of the total power is thereby emitted within a divergence of 20degrees in the lateral direction. The device showed single mode operation with a side mode suppression ratio of 30 dB in the temperature range from 10 to 280 K. This allowed tuning of the emission wavelength in the range from 7.36 to 7.46 mum. The estimated peak amplifier gain is 6.4 and 4.9 dB at 80 and 300 K, respectively, and the cavity losses are 12.5 and 22 cm-1 at the corresponding temperatures. (C) 2002 American Institute of Physics.

引用

页码：4103 / 4105

页数：3

共 13 条

[11]

KOSTEREV AA, IN PRESS

[12] A GAINASP/INP TAPERED-WAVE-GUIDE SEMICONDUCTOR-LASER AMPLIFIER INTEGRATED WITH A 1.5 MU-M DISTRIBUTED FEEDBACK LASER [J].