Hafnium silicide formation on Si(100) upon annealing

High dielectric constant materials, such as HfO2, have been extensively studied as alternatives to SiO2 in new generations of Si based devices. Hf silicate/silicide formation has been reported in almost all literature studies of Hf based oxides on Si, using different methods of preparation. A silicate interface resembles close to the traditional Si/SiO2. The silicate very likely forms a very sharp interface between the Si substrate and the metal oxide, and would be suitable for device applications. However, the thermal instability of the interfacial silicate/oxide film leads to silicidation, causing a dramatic loss of the gate oxide integrity. Despite the importance of the Hf silicide surface and interface with Si, only a few studies of this surface are present in the literature, and a structural determination of the surface has not been reported. This paper reports a study of the Hf silicide formation upon annealing by using a combination of XPS, LEED, and x-ray photoelectron diffraction (XPD) analyses. Our results clearly indicate the formation of a unique ordered Hf silicide phase (HfSi2), which starts to crystallize when the annealing temperature is higher than 550 degrees C.