DIRECT GROWTH OF CDZNTE/SI SUBSTRATES FOR LARGE-AREA HGCDTE INFRARED FOCAL-PLANE ARRAYS

Direct epitaxial growth of high-quality {100}CdZnTe on 3 inch diameter vicinal {100}Si substrates has been achieved using molecular beam epitaxy (MBE); a ZnTe initial layer was used to maintain the {100}Si substrate orientation. The properties of these substrates and associated HgCdTe layers grown by Liquid phase epitaxy (LPE) and subsequently processed long wavelength infrared (LWIR) detectors were compared directly with our related efforts using CdZnTe/GaAs/Si substrates grown by metalorganic chemical vapor deposition (MOCVD). The MBE-grown CdZnTe layers are highly specular and have both excellent thickness and compositional uniformity. The x-ray full-width at half-maximum (FWHM) of the MBE-grown CdZnTe/Si increases with composition, which is a characteristic of CdZnTe grown by vapor phase epitaxy, and is essentially equivalent to our results obtained on CdZnTe/GaAs/Si. As we have previously observed, the x-ray FWHM of LPE-grown HgCdTe decreases, particularly for CdZnTe compositions near the lattice matching condition to HgCdTe; so far the best value we have achieved is 54 arc-s. Using these MBE-grown substrates, we have fabricated the first high-performance LWIR HgCdTe detectors and 256 x 256 arrays using substrates consisting of CdZnTe grown directly on Si without the use of an intermediate GaAs buffer layer. We find first that there is no significant difference between arrays fabricated on either CdZnTe/Si or CdZnTe/GaAs/Si and second that the results on these Si-based substrates are comparable with results on bulk CdZnTe substrates at 78K. Further improvements in detector performance on Si-based substrates require a decrease in the dislocation density.