DAMAGE REMOVAL DOPANT DIFFUSION TRADEOFFS IN ULTRA-SHALLOW IMPLANTED P+-N JUNCTIONS

被引:19
作者
FAIR, RB [1 ]
机构
[1] DUKE UNIV,DEPT ELECT ENGN,DURHAM,NC 27706
关键词
D O I
10.1109/16.59914
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The tradeoffs between implant damage annealing and shallow junction formation are investigated. For very-low-energy amorphizing implants the time for damage anneal has a fourth-power dependence on depth below the Si surface. The depth effect depends on the type of amorphizing ion. It is shown that as a result, implanted B in Ge-preamorphized Si diffuses with no detectable self-interstitial supersaturation if the damage is <600 Å deep. Conditions for forming defect-free, shallow p+-n junctions are described in design curves and comparisons are made between several junction-formation approaches. Implantation of B at energies below 2 keV offers an attractive way of achieving 500-Å junctions. © 1990 IEEE
引用
收藏
页码:2237 / 2242
页数:6
相关论文
共 32 条
[1]   POINT-DEFECT DOPANT DIFFUSION CONSIDERATIONS FOLLOWING PREAMORPHIZATION OF SILICON VIA SI+ AND GE+ IMPLANTATION [J].
AJMERA, AC ;
ROZGONYI, GA ;
FAIR, RB .
APPLIED PHYSICS LETTERS, 1988, 52 (10) :813-815
[2]   ELIMINATION OF END-OF-RANGE AND MASK EDGE LATERAL DAMAGE IN GE+ PREAMORPHIZED, B+ IMPLANTED SI [J].
AJMERA, AC ;
ROZGONYI, GA .
APPLIED PHYSICS LETTERS, 1986, 49 (19) :1269-1271
[3]  
AJMERA AC, UNPUB
[4]  
CHEVACHAROENKUL S, UNPUB
[5]   LOW-THERMAL-BUDGET PROCESS MODELING WITH THE PREDICT COMPUTER-PROGRAM [J].
FAIR, RB .
IEEE TRANSACTIONS ON ELECTRON DEVICES, 1988, 35 (03) :285-293
[6]   MODELING RAPID THERMAL-DIFFUSION OF ARSENIC AND BORON IN SILICON [J].
FAIR, RB ;
WORTMAN, JJ ;
LIU, J .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1984, 131 (10) :2387-2394
[7]   POINT-DEFECT CHARGE-STATE EFFECTS ON TRANSIENT DIFFUSION OF DOPANTS IN SI [J].
FAIR, RB .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1990, 137 (02) :667-671
[8]  
FAIR RB, 1989, MICROELECTRONICS PRO, V221, P265
[9]  
FAIR RB, 1990, SOLID STATE TECH MAY
[10]  
GANIN E, 1989, ION BEAM PROCESSING, V147, P13