Mechanical properties and thermomechanical stability of diamond-like carbon films synthesized by pulsed vacuum arc plasma deposition

被引：17

作者：

Leng, YX ^{[1
]}

Chen, JY ^{[1
]}

Yang, P ^{[1
]}

Sun, H ^{[1
]}

Wan, GJ ^{[1
]}

Huang, N ^{[1
]}

机构：

[1] SW Jiaotong Univ, Sch Mat Sci & Engn, Chengdu 610031, Peoples R China

来源：

SURFACE & COATINGS TECHNOLOGY | 2003年 / 173卷 / 01期

基金：

中国国家自然科学基金;

关键词：

diamond-like carbon; friction; microhardness; pulsed vacuum arc plasma deposition; thermomechanical stability;

D O I：

10.1016/S0257-8972(03)00442-0

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The higher sp(3) bonding fraction hydrogen-free diamond-like carbon (DLC) films were deposited on Si(1 0 0) and Cr17Ni14Cu4 stainless steel substrates by pulsed vacuum arc plasma deposition as a function of bias substrate voltage. The results show that the sp(3) content increases slightly with higher substrate bias and the effective microhardness only increases slightly. The wear resistance of the as-deposited DLC films decreases with increasing substrate bias. The effective hardness of the annealed DLC films diminishes by approximately 20% and the wear resistance decreases after annealing at 400 degreesC due to local adhesion decreases, even though the wear resistance of the annealed DLC films is still much better than that of the Cr17Ni14Cu4 substrate. The thermomechanical stability of hydrogen-free DLC films synthesized by pulsed vacuum arc plasma deposition is better than the DLC films containing hydrogen synthesized by PECVD. (C) 2003 Elsevier Science B.V. All rights reserved.

引用

页码：67 / 73

页数：7

共 28 条

[1] Temperature dependence of mechanical properties of DLC/Si protective coatings prepared by PECVD [J].

Buršíková, V. ;

Navrátil, V. ;

Zajíčková, L. ;

Janča, J. .

Materials Science and Engineering: A, 2002, 324 (1-2) :251-254

[2] Thick, well-adhered, highly stressed tetrahedral amorphous carbon [J].

Chhowalla, M .

[3] Diamond coating on steel with a titanium interlayer [J].

Fan, QH ;

Fernandes, A ;

Gracio, J .

[4] Diamond-like carbon: state of the art [J].

Grill, A .

[5]

HOLMBERG K, 1994, TRIBOLOGY SERIES, V28, P442

[6] The structural and electron field emission characteristics of pulsed laser deposited diamond-like carbon films with thermal treatment [J].

Jung, HS ;

Park, HH ;

Pang, SS ;

Lee, SY .

THIN SOLID FILMS, 1999, 355 :151-156

[7] Realization of different carbon nanostructures by a microwave plasma enhanced chemical vapor deposition technique [J].

Kumar, S ;

Rauthan, CMS ;

Srivatsa, KMK ;

Dixit, PN ;

Bhattacharyya, R .

APPLIED SURFACE SCIENCE, 2001, 182 (3-4) :326-332

[8] Mechanical and tribological properties of diamond-like carbon films prepared on steel by ECR-CVD process [J].

Li, KY ;

Zhou, ZF ;

Chan, CY ;

Bello, I ;

Lee, CS ;

Lee, ST .

[9] Structural analysis of arc deposited diamond-like carbon films by Raman and X-ray photoelectron spectroscopy [J].

Li, LH ;

Zhang, HQ ;

Zhang, YH ;

Chu, PK ;

Tian, XB ;

Xia, LF ;

Ma, XX .

MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 2002, 94 (01) :95-101

[10] The tribological characteristics of diamond-like carbon films at elevated temperatures [J].

Liu, H ;

Tanaka, A ;

Umeda, K .

THIN SOLID FILMS, 1999, 346 (1-2) :162-168

← 1 2 3 →