Pulsed-laser deposition of crystalline Teflon (PTFE) films

被引：103

作者：

Li, ST ^{[1
]}

Arenholz, E ^{[1
]}

Heitz, J ^{[1
]}

Bauerle, D ^{[1
]}

机构：

[1] Univ Linz, A-4040 Linz, Austria

来源：

APPLIED SURFACE SCIENCE | 1998年 / 125卷 / 01期

关键词：

pulsed-laser deposition; polymers; thin films;

D O I：

10.1016/S0169-4332(97)00398-X

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Thin films of crystalline polytetrafluoroethylene (PTFE) were prepared by pulsed-laser deposition using 248 nm UV-excimer-laser radiation. Pressed powder pellets and bulk PTFE have been employed as target material. The films were analyzed by means of optical polarization microscopy, stylus profilometry, capacity measurements, XRD, and IR spectroscopy. The effect of substrate temperature T-s on the morphology and crystallinity of the films was studied. Films deposited from pressed powder targets at sufficiently high T-s consist mainly of spherulite-like microcrystallites. These films are continuous, pinhole-free, well adherent to the substrate, and have a composition which is similar to that of the target material. It is suggested that film formation is based on laser-assisted material transfer with subsequent melting and crystallization. They are superior to films deposited from PTFE bulk targets, cut from a solid rod, with respect to film morphology, deposition rate, film cohesion, and optical and electrical properties. (C) 1998 Elsevier Science B.V.

引用

页码：17 / 22

页数：6

共 15 条

[1]

Bauerle D., 2011, LASER PROCESSING CHE, V4

[2] DEPOSITION OF AMORPHOUS FLUOROPOLYMERS THIN-FILMS BY LASER ABLATION [J].