Monolithic integration in InGaAs-InGaAsP multiple-quantum-well structures using laser intermixing

The bandgap of InGaAs-InGaAsP multiple-quantum-well (MQW) material can be accurately tuned by photoabsorption-induced disordering (PAID), using a Nd:YAG laser, to allow lasers, modulators, and passive waveguides to be fabricated from a standard MQW structure, The process relies on optical absorption in the active region of the MQW to produce sufficient heat to cause interdiffusion between the wells and barriers, Bandgap shifts larger than 100 meV are obtainable using laser power densities of around 5 W . mm(-2) and periods of illumination of a few minutes to tens of minutes, This process provides an effective way of altering the emission wavelengths of lasers fabricated from a single epitaxial wafer, Blue shifts of up to 160 nm in the lasing spectra of both broad-area and ridge waveguide lasers are reported, The bandgap-tuned lasers are assessed in terms of threshold current density, internal quantum efficiency, and internal losses, The ON/OFF ratios of bandgap-tuned electroabsorption modulators were tested over a range of wavelengths, with modulation depths of 20 dB obtained from material which has been bandgap-shifted by 120 nm, while samples shifted by 80 mn gave modulation depths as high as 27 dB, Single-mode waveguide losses are as low as 5 dB . cm(-1) at 1550 mm, Selective-area disordering has been used in the fabrication of extended cavity lasers, The retention of good electrical and optical properties in intermixed material demonstrates that PAID is a promising technique for the integration of devices to produce photonic integrated circuits, A quantum-well intermixing technique using a pulsed laser is also demonstrated.